Detmaster PR - Web Inspection SystemDetmaster PR Web Inspection System is dedicated for detailed simultaneous on-line web inspection and quality control of coated paper and board products. The system detects coated paper and board surface defects as well as measures surface quality parameters such as gloss, brightness, gloss-mottling and white top mottling. The detector beams of the Detmaster PR system are always installed against the roll surface in order to realise stable measurement conditions where web bounce and undulation are completely eliminated. As a result of this necessary arrangement the Detmaster PR system is able to detect extremely low contrast surface defects such as blade streaks, nozzle streaks, butterflies, coating skips, etc. 
Paper products user interfaces 
System Picture |
Application Reports:Data Sheets:Reports:Installations:
Detmaster 8600 PR system installation on off-line Coater of PM6 at Stora Enso Oulu Mill in Finland. 
Detmaster 3000 PR system installation on Sheeter No. 6 at M-Real Simpele Board Mill in Finland. 
Detmaster 7200 PR system installation on BM1 at M-Real Kemiart Liners Mill in Finland. |
|
SR-Instruments Infoboard 18.8.2010SR-Instruments Oy is delivering two Detmaster MPH Pinhole Detection Systems to ArcelorMittal Weirton Works in USA. The systems will be installed in October on Tin Plating Lines No. 4 and No. 6, which line speeds are 550 m/min. Detmaster MPH systems are able to detect pinholes from size 10 um up to large holes, and therefore, they will guarantee the efficiency and the quality assurance at the concerned Tin Plating Lines at ArcelorMittal Weirton Works. 22.4.2010 SR-Instruments Oy is delivering the Detmaster MPH Pinhole Detection System for rental use to the Ternium Mexico's Monterrey mill site in Mexico. The system will be installed on Tension Leveling Line, which maximum line speed is 425 m/min. The Detmaster system is able to detect pinholes from size 10 um up to large holes, and therefore, it will guarantee the efficiency and the quality assurance at the Ternium Mexico's Tension Leveling Line. 7.10.2009 SR-Instruments Oy is delivering the Detmaster MPH Pinhole Detection System to the Impress Deventer Plant in The Netherlands. The system will be installed on Cut-to-length Line No. 102, which maximum line speed is 450 m/min and maximum number of strokes 235 strokes/min. The Detmaster MPH system is able to detect pinholes from 10 um up to large holes and provides a signal to reject the sheets including pinholes. Thus, Detmaster MPH system will guarantee the efficiency and quality assurance at the Impress Deventer Plant's Cut-to-length Line No. 102. Archive... Contact information  SR-Instruments Oy Teknologiantie 3 90590 Oulu FINLAND Tel. +358 8 563 5800 Fax +358 8 563 5801 E-mail: Partners  |
-Optical Quality Assurance Systems |
| Copyright © 2010 SR-Instruments OY |