SR-Instruments wins “The Technology Provider Of The Year” award!

Please, check out the enclosed technical article “Automatic Roll Mark Detector Improves Cold Rolling Mill Performance” for more information on the winning concept.

Naturally we are very pleased about winning the award. And I am especially happy for all our employees and our co-development partner AM Global Research and Development. It has required commitment and cross-scientific work over many years to make the once impossible to possible. “Still remember the very beginning of the project, and the famous words of one of the seniors of ArcelorMittal: “You guys are crazy! Are you implementing an optical method to inspect roll marks!? They are not even visible for a human eye”. And yes, we did it!”  Says Mr. Pyörret, the product manager of the new roll mark detector.

RMD article in Feb 2019 issue of AIST magazine

SR-Instruments nominated as “The Technology Provider Of The Year” finalist!

The automatic Detmaster Roll Mark Detection system carries SRI forward among the finalists in the respected American Metal Market Awards contest. Finally this breakthrough technology is ready, industrially approved, showing great results, and ready for roll out.

“This is great!”, says Mr. Mikael Kurth, CEO of SR-Instruments. “R&D in this extent is always “a bumpy ride on a long road”, but I am very pleased we are finally here. And especially pleased with the returns our pilot mill has achieved with the help of this new technology. The performance of this new detection system has been amazing. It´s value is easily extracted by the operators, and everything goes right to the bottom line of the cold mill”.

CEO Kurth wants their team to win this award too. Not for the sake of winning, but to get the recognition to all the people involved, their commitment and effort throughout the years; our own engineers, the team from AM Global Research, and the team from the pilot mill. “After all, they deserve to win!” Kurth wants to thank their long-term cooperation partner, ArcelorMittal and adds the new roll mark detector is an excellent end-user – technology provider co-operation example, contributing to the competitiveness and success of the industry.

The 20th MPH Pinhole Detection System for TataSteel!

In 2006-2007 SRI delivered a total of 6 Detmaster pinhole detectors to Tata Steel Ijmuiden. This year Ijmuiden will add another Detmaster MPH system to their Detmaster pinhole detector fleet, as they build new lines to enlarge their portfolio of packaging steels products. Tata Ijmuiden is a major steel producer in Europe and also one of the largest packaging steel producers.

 

The new Detmaster MPH system will be implemented on a brand new polymeric line. The line is delivered by RDI Fagor, who is also the contractor for SRI. The new Detmaster MPH1400 pinhole detection systems expected installation is in early 2017.

 

Tata Ijmuiden chose again several popular system options including the roll-out function, ISO9001 compliant verification disc function and KIS test tool option. All based on their needs and positive 10 year user experience with Detmaster pinhole detectors. These options have been found very useful and increasing the user value of the system.

 

TataSteel has now increased the total number of Detmaster MPH pinhole systems they have to 20 systems!

 

logo-fagor TataSteel_Blue_RGB

During the second half of 2015, SR-Instruments was awarded some repeat orders by its existing customers.

Together with its North American distributor Glenmount Global Systems (GGS), SR-Instruments delivered and commissioned a Detmaster MPH1400 pinhole detection system for US Steel Midwest in Portage Indiana to upgrade their Electrolytic Tinning Line #1. This was the third Detmaster system for the US Steel Great Lakes operations during 2015. In total US Steel and its affiliates now run 10 Detmaster systems.

AlcelorMittal Temirtau in Kazakhstan added another (6 in total) Detmaster pinhole detector system to their Detmaster fleet. This latest Detmaster MPH1500 will be installed on their cut-to-length line #3 to control the reject gate operation and assure delivery of fault free sheets.

Erdemir´s  (Turkey) second Detmaster system was commissioned on their electrolytic tinning line in October.

During 2015 US Steel Gary Works installed two Detmaster MPH systems, on their cleaner line and continuous annealing line. The MPH1400 systems were commissioned together with SRI´s North-American distributor Glenmount Global Solutions.

And we are pleased to welcome Perstima Berhad from Malaysia to join the global Detmaster team. Perstima is a quality focused supplier whose inspection practices will be further enhanced with a Detmaster MPH system installation on electrolytic tinning line #2. The delivery included the automatic system verification tool option among others. We are looking forward to a good long-term cooperation with Perstima.

SR-Instruments was awarded some repeat orders by it’s existing customers.

Before the end of last quarter of 2012, SR-Instruments was awarded some repeat orders by it’s existing customers.

SR-Instruments will deliver and commission a Detmaster MPH2000 pinhole detection system to Ternium Mexico Pesqueria in connection to their new Tension Leveling Line investment. Detmaster will be an integrated part of this new line, which will be delivered by FAGOR – RDI Met., S.L. Spain.

Altos Hornos de México S.A.B. de C.V. in Mexico added another Detmaster pinhole detector system to their Detmaster inspection system fleet. A new Detmaster MPH1500 will be installed to their Preparation Line #1.

Also Ton Yi from Taiwan awarded SR-Instruments Oy with two more Detmaster MPH contracts. The units will be installed to their Electrolytic Tin Plating Line (MPH 1200) and Continuous Annealing Line (MPH 1500) during 2013.

We are very happy and proud to announce that all of these contracts were contributed by positive user experiences with already running Detmaster systems in the companies.

Zhangjiagang Yangzi River Cold Rolled Sheet Company

Zhangjiagang Yangzi River Cold Rolled Sheet Company in China has recently acquired two pieces of SR-Instruments Oy’s Detmaster 1400 MPH Pinhole Detection Systems for new Electrolytic Tin Plating Line and Continuous Annealing Line. The concerned Detmaster MPH systems are able to simultaneously detect tiny edge cracks and pinholes from size 10 um up to large holes. With these features Detmaster MPH systems guarantee the efficiency and the quality assurance at the new Electrolytic Tin Plating and Continuous Annealing Lines of the Works.

Erdemir Works in Eregli, Turkey has recently acquired SR-Instruments Oy’s Detmaster 1300 MPH Pinhole Detection System

Erdemir Works in Eregli, Turkey has recently acquired SR-Instruments Oy’s Detmaster 1300 MPH Pinhole Detection System for Electrolytic Tin Plating Line to replace an obsolete pinhole gauge. The concerned Detmaster MPH system is able to simultaneously detect tiny edge cracks and pinholes from size 5 um up to large holes. With these features Detmaster MPH system guarantees the efficiency and the quality assurance at the Electrolytic Tin Plating Line of Erdemir Works.

US Steel East Chicago Tin Works has recently acquired the second Detmaster 1400 MPH Pinhole Detection System

US Steel East Chicago Tin Works has recently acquired the second Detmaster 1400 MPH Pinhole Detection System from SR-Instruments Oy for its Continuous Annealing Line to replace an obsolete pinhole gauge. The concerned Detmaster MPH system is able to detect tiny edge cracks and pinholes from size 10 um up to large holes as well as simultaneously to measure the width of the strip. With these features Detmaster MPH system guarantees the efficiency and the quality assurance on Continuous Annealing Line at US Steel East Chicago Tin Works.

SR-Instruments is delivering two new Detmaster MPH pinhole detection systems to CSN’s Volta Redonda Works in Brazil

SR-Instruments is delivering two new Detmaster MPH pinhole detection systems to CSN’s Volta Redonda Works in Brazil. The concerned Detmaster MPH systems will be installed on Cut-to-length Line No. 12 as well as on Recoiling and Cutting Line. Detmaster MPH systems are able to detect tiny edge cracks and pinholes from size 10 um up to large holes. SR-Instruments has supplied previously to CSN’s Volta Redonda Works 3 Detmaster MPH systems increasing the number of the equipment now at the works to 5 pieces.

US Steel Gary Works Tin has recently acquired SR-Instruments Oy’s Detmaster 1400 MPH Pinhole Detection System

US Steel Gary Works Tin has recently acquired SR-Instruments Oy’s Detmaster 1400 MPH Pinhole Detection System for its Tin Plating Line No. 6 to replace an obsolete pinhole gauge. The concerned Detmaster 1400 MPH system is able to simultaneously detect tiny edge cracks and pinholes from size 10 um up to large holes as well as to measure the width of the strip. With these features Detmaster 1400 MPH system guarantees the efficiency and the quality assurance on Tin Plating Line No. 6 at US Steel Gary Works Tin.